Eccentric Slotter Machine

The next process after cutting & creasing of the sheet is slotting & corner cutting. It is simultaneously done over the eccentric slotter machine. Slot dies are mounted on an eccentric shaft which causes them to move in an arc so that the board is slotted in a shearing manner. The corner die is moved, likewise. The sheets are fed through the machine by hand. Due to its rugged construction, it can take up a number of sheets in one stroke. The dies can be moved on the machine very easily & the slot depth can be adjusted by the gauge provided along with it. Two guides are provided on the feed table, to support the sheets at the correct dimension and feeding.

• With extra heavy duty C.I. feeding table.
• With electric motor & motor.
• With hand wheel for adjustments.

This machine is utilized for slotting & corner cutting of the corrugated board with following specifications:

• Extra heavy duty C.I. frame.
• With 3 slotting dies.
• With one corner cutting dies.
• With special gear track mechanism for movement of dies.
• With two guides. 

Technical Specifications

Size	Capacity (Stks./Min.)	Min. Space between slots	Max. Slot depth	Corner Width	Power Required	Floor Space	Gross Weight
65	30	5	14	2.75	2 H.P.	90x54	1600 kgs.
75	30	7	17	3.5	3 H.P.	100x56	2100 kgs.
85	30	7	18	3.5	3 H.P.	110x56	2300 kgs.
95	30	8	21	4	5 H.P.	120x60	2500 kgs.